BCMPY - EPOXY RUSTMATE

  • MSDS: BCMPY
  • Manufacturer: ZYNOLYTE PRODUCTS INC
  • Product Name: EPOXY RUSTMATE
  • National Stock Number: 8010-00N006373
Product Identification

Product ID:EPOXY RUSTMATE
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006373
MSDS Number: BCMPY

Responsible Party
ZYNOLYTE PRODUCTS,INC

Emergency Phone: 213-542-7701

Cage: 25461

Contractor
ZYNOLYTE PRODUCTS CO
6244 CARSON, CA 90749 US

Telephone: 310-513-0700

Cage: 25461

Ingredients

PARAFFINE (INCLUDING NAPHTHENER)

Fraction By Weight: 92.5%

ACGIH TLV: 200 PPM (MFR)


AROMATICS (HEAVIER THAN XYLENE)

Fraction By Weight: 7.5%

ACGIH TLV: 200 PPM (MFR)

Hazards

Effects of Overexposure:EYE/SKIN: IRRITATION,VAPORS:
HEADACHE,NAUSEA,DIZZINESS,ETC.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES. SKIN: WASH WITH SOAP &
WATER. INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIFICAL RESPIRATION
IF NEEDED. INGESTION: DO NOT INDUCE VOMITING,GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:102F/38C
Lower Limits:1.1
Upper Limits:6.4
Extinguishing Media:CO*2,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINER
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME EAT.

Accidental Release

Spill Release Procedures:SECURE IGNITION SOURCES,CONTAIN WITH
ABSORBENTS & PLACE IN A CONTAINER WITH A LID.

Handling

Handling and Storage Precautions:AVOID OPEN FLAMES,EXCESSIVE HEAT AND
OTHER IGNITION SOURCES.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SPLASH PROOF GOGGLES.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:314F/156C
Vapor Pres:15
Vapor Density:4.9
Spec Gravity:1.096
Evaporation Rate & Reference:0.12
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:54

Stability

Stability Indicator/Materials to Avoid:YES
N/A (MFR)
Hazardous Decomposition Products:N/A (MFR)

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.